Extended Pipe Clamp
Extended Pipe Clamp Specification Sheet
The Extended Pipe Clamp is specified for pipe sizes from 1/2" through 8". Its stated service is attachment to a structure without the use of rods. This application detail is central to selecting the product: review the intended support arrangement and confirm that this clamp’s specified service matches the requirements of the installation before ordering.
The clamp is made of carbon steel and is offered with a plain finish or a hot-dip galvanized finish. The galvanized option is supplied with zinc-plated fasteners. Maximum temperature depends on the selected finish: the stated maximum is 650° F for plain finish and 450° F for galvanized finish. Consider the applicable operating conditions when choosing between the available finishes, and use the corresponding temperature limit as part of that decision.
These specifications provide the core information needed for product review and purchasing. They identify the supported pipe-size range, material, finish choices, stated service, and finish-specific maximum temperatures. No additional dimensions or performance ratings are stated here, so base selection on the information provided and confirm any other project requirements through the appropriate technical review.
Application and Service Considerations
This clamp is intended for the stated service of attaching pipe to a structure without using rods. That makes the service description a useful starting point when comparing support components for a project. It helps distinguish an application that calls for direct structural attachment from one that is designed around rods. The product should be considered where its stated service aligns with the planned support method, rather than treated as a universal solution for every pipe-support arrangement.
The extended clamp format is identified by the product name, while the supplied specifications define the application and selection boundaries. Review the pipe size against the stated range of 1/2" through 8", then check that the specified attachment service and finish are suitable for the project. These checks support a clear, specification-led purchasing decision without assuming unlisted installation details or operating capabilities.
For project coordination, share the pipe size, intended structural attachment arrangement, chosen finish, and relevant operating temperature with the personnel responsible for specifying or installing the support. This helps keep product selection consistent with the stated service and finish limits. The exact installation approach should be determined by the project requirements; the product information provided does not specify a mounting procedure, load rating, or additional compatibility criteria.
Material, Finish, and Temperature
Carbon steel is the stated material for the Extended Pipe Clamp. Buyers can specify either a plain finish or a hot-dip galvanized finish, with zinc-plated fasteners included for the galvanized option. These finish details should be considered together during specification and purchasing so the selected product configuration is clearly identified and can be checked against the operating conditions of its intended use.
The maximum temperature ratings differ by finish. Plain finish is listed for a maximum temperature of 650° F, while the galvanized finish is listed for a maximum temperature of 450° F. These are the limits stated for the respective finishes; do not apply one finish’s rating to the other. Compare the expected service temperature with the rating for the finish being ordered, and seek application-specific guidance if requirements are not addressed by these specifications.
During product review and ongoing maintenance planning, retain the selected finish and its stated temperature limit with the relevant project records. Inspection and care practices should follow the needs of the installation and applicable site procedures. Since no inspection interval, cleaning method, coating repair instruction, or environmental suitability is specified here, those details should not be assumed from the material and finish description alone.
Selection and Ordering Information
When ordering, specify the pipe size, figure number, name, and finish. The product name is Extended Pipe Clamp. Include all requested details in the purchase specification so the required size and finish can be identified clearly. The size must fall within the stated range of 1/2" through 8", and the finish should be named as plain or hot-dip galvanized, as applicable.
Before submitting an order, confirm the figure number for the required item and provide the exact pipe size. Also verify that the intended service is attachment to a structure without the use of rods and that the selected finish’s maximum temperature rating suits the planned conditions. Clear, complete ordering information helps reduce ambiguity when the product is reviewed, quoted, or prepared for a project.
For receiving, installation coordination, and future reference, keep the ordered product details with the applicable project documentation. Recording the size, figure number, product name, and finish preserves the basis of selection and makes later checks more straightforward. These records can also help distinguish the plain and galvanized configurations, including the zinc-plated fasteners associated with the galvanized finish, without introducing specifications that are not provided.