Chain Link End Rail Clamp Overview

• 

This galvanized steel end rail clamp, also called a rail band or T clamp, is designed to join chain link fence components in a T-joint arrangement. It is sized for a 1 5/8-inch outside-diameter post and a 1 3/8-inch outside-diameter rail. The two-piece design brings the connection components together around the fence members, while pre-drilled holes help simplify installation. Use the specified post and rail sizes to select a clamp that matches the parts being connected.

For fence assembly or repair work, a correctly sized clamp provides a practical way to connect a rail and post without relying on an improvised joint. Its purpose is to create a stable connection between two posts or rails in a chain link fence. This makes it useful when installing a new section, restoring a connection, or addressing a temporary panel replacement. The product is also suitable for kennel setups, where chain link components are assembled into a practical enclosure.

Features and Practical Applications

• Two-piece clamp design for a secure installation around the compatible fence components.
• Galvanized steel construction with a galvanized finish for superior rust resistance.
• Pre-drilled holes to simplify the installation process.
• Suitable for use in kennel setups.
• An option for a temporary replacement connection for chain link panels.
• Creates a stable T-joint connection between two posts or rails in chain link fences.

In a repair situation, this clamp can help reconnect compatible fence members as part of a temporary panel replacement. Its two-piece construction is useful for bringing the joint components into position around the post and rail, and the pre-drilled holes make it easier to align the fastening points during assembly. These details can help keep installation straightforward for routine fence work, whether the task involves a kennel setup or a chain link panel connection.

The galvanized finish is intended to provide superior rust resistance. As with any fence hardware, keeping the connection accessible for inspection can make it easier to check that components remain properly assembled. During routine maintenance, look over the clamp and surrounding fence members for visible dirt, wear, or loosening. Keeping the joint clear and checking its fasteners as needed supports ongoing upkeep; the clamp itself does not replace the need to use the specified bolts and nuts.

Specifications and Required Fasteners

• Material: Galvanized steel.
• Post size: 1 5/8 inches outside diameter (OD).
• Rail size: 1 3/8 inches outside diameter (OD).
• Requires 5/16-inch x 2-inch carriage bolts and nuts; sold separately.

Before installation, confirm that the post and rail measurements correspond to the clamp’s listed sizes. The post opening is specified for a 1 5/8-inch outside-diameter post, and the rail size is specified for a 1 3/8-inch outside-diameter rail. These measurements identify the compatible fence members and help avoid selecting hardware for a different post or rail size. The product is a clamp for the stated components; it does not include the separate fastening hardware needed to secure the connection.

Installation requires 5/16-inch x 2-inch carriage bolts and nuts. Purchase these fasteners separately and have them available before beginning assembly. The clamp’s pre-drilled holes are provided to simplify installation, but the correct bolts and nuts are still required to complete the joint. Check that the fasteners match the stated requirement and are on hand before positioning the clamp and joining the fence members.

Installation Notes and Product Details

For a tidy assembly process, first identify the post and rail that will form the T-joint and verify their outside diameters. Position the two-piece clamp around the corresponding fence members, align its pre-drilled holes, and use the required carriage bolts and nuts to complete the connection. Follow suitable installation practices for the fence and hardware being used, and check that the joined members are positioned as intended before tightening the fasteners. This guidance does not add a load rating or other performance specification; refer to the stated sizes and fastener requirement when planning the work.

This rail band is intended for chain link fence applications where a T-joint connection is needed, including kennel setups and temporary replacement use for chain link panels. Its galvanized steel material and finish, two-piece design, and pre-drilled holes address the basic needs of connecting compatible rails and posts. Confirm the fit, obtain the separate hardware, and inspect the completed joint as part of normal fence maintenance.

Please note: Nuts and bolts are not included with the clamp. Due to variations in manufacturing processes, the actual product you receive may differ slightly from the image shown.